PRO® S-6 Synergy Wheel Coating is the longest lasting and most durable form of protection for wheels. Synergy is a high quality, semi-permanent, super hydrophobic nano ceramic coating specifically formulated wheels and calipers. This high tech coating comprises advanced ceramic technology found in our durable paint coating and blended to create an extremely hard, slick, clear barrier to offer even more intense corrosion resistance, durability and protection on OEM and aftermarket wheels and calipers.
Features & Benefits: 9H Hardness
Super Hydrophobic Effect
Weather & Chemical Resistant
Heat & UV Resistant
High Gloss Finish
Durability: Protects up to 2 years
Application: Shake well before using. Read label before use. See SDS for more information.
Thoroughly clean wheels & calipers using PRO® C-42 Wheelie Clean vehicle to remove all contamination. If necessary,
use PRO® C-44 Reactive to remove all embedded iron deposits. After cleaning, remove all residue using PRO® S-5-P
Synergy Surface Prep to ensure optimal bonding and durability of the coating. Work one section at a time. Apply a small
amount of PRO® S-6 Synergy Wheel Coating to a microfiber applicator and spread evenly over the wheels or calipers.
Remove excess material immediately. The amount of product should be enough to evenly coat the area without over
saturation. Work the coating into the surface until it disappears. Lightly buff with a clean, soft, lint-free microfiber towel.
Allow to cure for 12-24 hours.
Helpful Tips: Keep from freezing (32 ºF/0 ºC). Recommended application temperatures 40º - 90º F. Do not apply in direct sunlight or
to hot surface. Apply in dust free, shaded area. Additional coats may be applied for increased protection, shine, hardness
and durability. Avoid washing vehicle for 5 days after application. Keep surface dry for 8-12 hours after application. Allow
to cure for 24 hours before exposure to water or the environment. Apply S-4 Synergy Ceramic Detail Spray after every
wash or as needed to restore hydrophobicity and gloss.